When it comes to water heaters, a small problem can easily turn into a huge hassle, since hot water is so integral to comfort in the home. However, you might not want to immediately call a plumber if something goes wrong. Instead, you can try to troubleshoot the situation yourself. You might even find that you can fix the problem on your own. Here are some tips on how to handle a common water heater problem: a total lack of hot water.
No Hot Water
If you have no hot water at all, then chances are that you aren't dealing with a piping problem. If you did have a blockage or leak in your pipes, then you would probably be getting hot water in some rooms, but not in others. Therefore, you should first check every single faucet in your house before concluding that your water heater is the source of your troubles. If you find even one faucet that gets hot water, then your water heater likely isn't at fault.
However, there is one situation where a piping leak/blockage could result in the entire house being denied hot water. If the problem occurs before any branches in the piping, then that could prevent hot water from getting to the rest of your home. Unfortunately, it can be pretty difficult to access these pipes, especially if the blockage is inside your walls. To deal with this, you probably want to call a professional. You don't want to tear out part of your wall just to realize that you don't have the tools or expertise needed to fix your pipes.
You should take a look at the heater and see if any problems are immediately apparent. If the heater is making strange noises, you see any cracks, or the power line to the heater appears to be frayed or otherwise damaged, then you have somewhere to start your investigation. If your heater is electric, you should make sure that you cut all power to the heater before tinkering around with it. Water heaters use a lot of electricity, which can be pretty dangerous to humans. Even if the heater has no power, you should still take precautions and wear insulated gloves if you decide to open it up.
In some cases, the solution might be as simple as checking your circuit breaker. If you recently had a power outage, then your circuit breaker might have flipped a couple of switches. For more information, talk to a professional like Drain-A-Way Inc.Share